MM-6180P

A PMC-to-PCMCIA Adapter
Features

Capacity
CMOS NVRAM: 2MB to 4MB
FLASH: 4MB to 175MB
Hard Drive: 520M to 1040MB (depending on PCMCIA card capacity)

Flash memory software driver example supplied on a floppy diskette along with a sample listing in "C" code

Accommodates one Type I, Type II, or Type III PCMCIA module

Compatible also with PMC Specification Rev. 2.0

Compatible with PCI Specification Rev. 2.1

Software configurable no jumpers

Meets PC Card Standard 95
Description

The MM-6l80P is a PCI Mezzanine Card (PMC) designed to utilize different PCMCIA cards. It can accept one Type I, Type II or Type III card.

The MM-6l80P accepts PCMCIA SRAM, FLASH, Hard Drives, etc. Software Drivers are available for many different operating systems.

The MM-6l80P adapter has one 68-pin connector that accepts the PCMCIA modules.

A +12V control switch is provided for FLASH memory programming.

Reliability is ensured by burn-in and running memory diagnostics that check operation for 48 hours while temperature cycling boards from 0°C to 70°C.

MM-6180P Specifications
bullet

Capacity :  CMOS NVRAM: 2MB to 4MB, FLASH: 4MB to 175MB, Hard Drive: 520M to 1040MB (depending on PCMCIA card capacity)
bullet

Compatibility : PMC Specification Revision 2.0; PC Card Standard 95
bullet

Memory Partition : One 68-pin socket for either FLASH Memory, CMOS NVRAM, Hard Drive, FAX/modem, etc.
bullet

Address : 26 bits
bullet

Data In/Data Out : 8, 16 bits
bullet

Operating Temperature : 0°C to +70°C
bullet

Storage Temperature : -40 to +85°C
bullet

Relative Humidity : Up to 95% without condensation
bullet

Power Requirements : +5V @ 150 ma